manualshive.com logo in svg

Brother 1870N - HL B/W Laser Printer, User Manual

Share
Download
Brother 1870N - HL B/W Laser Printer User Manual Download Page 199

APPENDIX 

 

 

A–29 

LAN Connection 

 

Caution 

Connect this product to a LAN connection that is not subjected to over 
voltages. 
 
 

Geräuschemission / Acoustic Noise Emission (For Germany Only) 

 
Lpa < 70 dB (A) DIN 45635-19-01-KL2 
 
 

IT power system (For Norway Only) 

This product is also designed for IT power system with phase to phase 
voltage 230 V.

 

 

IMPORTANT - Wiring Information (For U.K. Only) 

 
If the power cord supplied with this printer is not suitable for your electrical 
outlet, remove the plug from the mains cord and fit an appropriate three-pin 
plug. If the replacement plug is intended to take a fuse then fit a fuse with 
the same rating as the original. 
 
If a moulded plug is severed from the power cord then it should be destroyed 
because a plug with cut wires is dangerous if plugged into a live socket 
outlet. Do not leave it where a child might find it. 
 
In the event of replacing the plug fuse, fit a fuse approved by ASTA to 
BS1362 with the same rating as the original fuse. 
 
Always replace the fuse cover. Never use a plug with the cover omitted. 
 
WARNING - THIS PRINTER MUST BE PROPERLY EARTHED. 
 
The wires in the mains cord are coloured in accordance with the following 
code: 
 

  Green 

and 

yellow: 

Ground 

 

  Blue: 

   Neutral 

 

  Brown: 

 

  Live 

 

Summary of Contents for 1870N - HL B/W Laser Printer













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands