Brother 1870MC - B/W - All-in-One, Owner'S Manual

Page: 60 / 136

52
C H A P T E R S E V E N
You can register only one Distinctive Ringing pattern with the FAX/MFC. Some
ringing patterns cannot be registered.
■
The FAX/MFC will answer only calls to its registered number.
■ To have your TAD answer only the main number, the FAX/MFC must be in
Manual Mode.
■ In F/T Mode or FAX ONLY, the FAX/MFC will answer all numbers on the
phone line.
Registering the Distinctive Ringing phone number
1 Disconnect the FAX/MFC from any TAD or telephone company voice mail.
2
Have someone ready to call the Distinctive Ringing number
you’re assigning to the FAX/MFC.
3 Press Function ,
6
,
7
.
4 Press or to select the SET Mode.
5
Press Set .
6 Press Stop . The screen displays:
D/R SET MODE
Now, another person must call your fax number.
If you want to exit this programming, press Stop . Settings
remain unchanged.
7
When the FAX/MFC rings, listen for the ring pattern, and make sure it’s the
one you want for the FAX/MFC.
If it is, wait until the screen displays:
PICK UP TO SET
8
Lift the FAX/MFC handset and press Start . The screen displays
REGISTERED. (If the incorrect distinctive ringing number was called, press
Stop to cancel.)
9
Hang up.
Your FAX/MFC must be in MANUAL mode before someone calls.
Once you’ve registered the Distinctive Ringing number in your FAX/MFC, you can
turn this feature
ON
(or
OFF
). To change the setting, follow steps 1 to 4 above,
selecting ON or OFF .