Brother 1750 - P-Touch Color Thermal Transfer Printer, User Manual

Page: 27 / 71

25
PRINT KEY & FEED FUNCTION
After you have entered your text and chosen the desired format settings, you are ready to
print.
To print a label:
●
Press
a
once. The message “PRINTING” is displayed.
To feed the tape:
●
Hold down
f
and press
g
once. 1” (25 mm) of tape is fed out.
To cut the tape:
●
Push down on the tape cutter lever.
☞
In order to prevent damaging the tape, do not try to cut it while printing or feed-
ing. Pushing down on the tape cutter lever too far may break it.
EXAMPLE
This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1
Press
<
or
>
to position the cursor below the number that you wish to increase.
2
Hold down
f
and press
A
. The message “NUMBER:1–9?” appears in the display.
3
Press the number key (
1
to
9
) of the last number that is to be printed.
☞
To cancel the Numbering, hold down
f
and press
A
(or press just
c
).
4
Press
a
(or
h
) to begin printing the labels.
To make a label using the NONE tape margin setting:
1
Press
a
once.
2
Hold down
f
and press
g
once.
3
Push down on the tape cutter lever.
PRINTING
NUMBERING FUNCTION