Brose E 41227, User Manual, Page: 28 / 36

Troubleshooting | Remote 28 | ENG
Charge level
...
100-20% Battery capacity
10% Battery capacity
<5% Battery capacity:
Batterie Reserve ist erreicht
Tab. 06: Charge Level
When the battery is charging on the bike, the
green status LED flashes slowly.
When the battery is fully charged, the entire
LED strip and the green status LED will be
constantly illuminated.
If an error occurs during the charging process,
the status LED changes colour between green
and red (see Troubleshooting chapter).
6. Troubleshooting
Always observe all error information!
Have repairs done by a certified bicycle dealer
only.
The
«Display Remote»
display/control unit
displays error messages from the entire
pedelec system.
The fault display indicates fault that the
system can detect independently.
Depending on the type of fault, the drive
may be automatically switched off. Check
the e-bike before making any further trips.
Driving on without the assistance of the drive
is possible at any time.
›
The fault display may indicate serious
errors in your Brose Drive system. Errors
prevent the safe operation of the e-bike.
There is a risk of accidents involving
personal injury and damage to the e-bike.
›
Stop riding the e-bike. Inform yourself
about the meaning of the error information
and take note of the solution.
›
If the meaning of the information is unclear,
stop riding and turn the bike off. Contact
the bike manufacturer, dealer or workshop
for information on the next steps.