Brose E 41227, User Manual, Page: 25 / 36

Remote | Operation and Control 25 ENG |
5.3. Displays
(1)
(3)
(2)
Fig. 2:
Display Remote
The display (Fig. 2) provides an overview of the
following information:
(1)
Lighting display
(2)
LED strip (assistance level/charge level
display)
(3)
Status LED (e.g. Error)
LED Band & Status LED
The status LED (Fig. 2-3) indicates the
information displayed by the LED strip
(Fig. 2-2):
In normal operation, the status LED (green) and
the LED strip indicate the battery charge level.
If you press the
«Increase»
or
«Decrease»
button, the status LED (blue) changes colour
and shows you the selected assistance level.
Status LED
blue Assistance level
green Battery charge level
orange Warning
red Error
Tab. 03: Status LED
5.4. Operating your Brose Drive
System
The Brose Drive System can only be operated
with a charged battery (min. one white LED
visible).
Depending on the installed battery, it may take
a few moments for the display to turn on.
Switching on
To switch on the e-bike system you have the
following options:
›
With the e-bike battery inserted, briefly
press the
«On/Off»
key on the control unit
once.
›
Press the
«On/Off»
key on the e-bike
battery (bicycle manufacturer-specific
solutions are possible that do not have
access to the battery
«On/Off»
key, see
battery/bicycle manufacturer‘s manual).
The display unit activates automatically.
›
The Brose Drive System is now ready to
operate.
The drive is activated as soon as you pedal
(except in the
«Walk Assist»
function or in
the
«OFF»
assistance mode). The motor power
depends on the set assistance level on the
control unit.
As soon as you stop pedalling in normal
operation, or once you have reached a speed
of 25 km/h, the e-bike drive assistance
will be disabled. The drive is automatically
re-activated as soon as you pedal and the
speed is below 25 km/h.