Broox RB-101, User Manual

Page: 3 / 12

3
Important tips
1. Make sure that the batteries work well. It is strongly
recommended that the device get charged before the first
use. And the most effective way for reactivating the batteries
is as follow; charge the device via the USB cable which is inside
the package for 6 hours, unplug the device and repeat it for
another 6 hours, unplug it and repeat for the third time.
2. Next step is finding a proper place for installing the device as
it plays a great role in the result you get from the repellent.
Consider the following points when choosing the location of
the device.
a. Avoid installing the device in shadow, otherwise the
repellent does not charge adequately during the day and
the number of times for charging the device via USB cable
will increase.
b. Consider a place for the repellent where the animals tend
to enter your area.
c. There should not be anything in front of the repellent as
the motion detector should be able to detect the animals’
movement.
d. Based on the kind of the animal, sometimes it is better
to install the repellent above ground level (for bigger and
taller animals like deer) or put it close to the ground for
kinds of animals which move close to the ground or even
go under the ground. In both cases you should make sure
that the motion detector is able to detect the motion of
the animal.
3. After installing the device, the proper mode should be chosen
based on the kind of the animals you want to repel. This device
provides 5 different modes. Each of these modes get activated
when the PIR detects a motion.
4. Modes 1, 2 and 3 provides just ultrasonic sound, in different
ranges of frequencies.