aircycle 1.1/1.2 – In-built Control & SB
Last Updated 02-01-13
Page 8 of 14
4.0
Installation
It is important that the full installation of this system is carried out by competent persons, including
all electrical works and connections being completed by a qualified electrician.
The MVHR unit is designed to be installed indoors, within an attic, storage cupboard, or void space,
away from exposure to frost, water, or intense heat.
A clear access space is required around the unit; this will ensure ease of installation relating to
ductwork, wiring, and the connection of the condensate drain. It is important that filters to the
system can also be accessed for replacement.
4.1 Mounting
The aircycle 1.1/1.2 Ws is designed for Wall Mounting only. The unit should be attached the to the
wall as shown using the wall bracket provided, please ensure the mounting surface can safely bear
the load of the unit using suitable screw fixings.
One bracket should be secured to the back of the unit as shown in
Fig. 1
, the second bracket should
be secured to the mounting surface as shown in
Fig. 2
. Please ensure the brackets are level.
The unit can then be set onto the mounting surface with the lip of each bracket intersecting as
shown in
Fig. 3
Fig. 1
Fig. 2
Fig. 3
