2-2
Models 1350E and 1355E
Section 2 Installation
Installation and Operation Manual
X-VA-1350E-eng
Part Number: 541B082AAG
February, 2011
2-3 Return Shipment
Do not return any assembly or part without a Return Materials Report. The
Return Materials Report is available from all District Sales Offices and the
Product Service Department, Hatfield, PA 19440. Information describing
the problem, corrective action, if any, and the work to be accomplished at
the factory must be included.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: [email protected]
www.BrooksInstrument.com
Brooks Instrument
Brooks Instrument
Neonstraat 3
1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands
Tokyo, 136-0073 Japan
P.O. Box 428
Tel +81 (0) 3 5633 7100
6710 BK Ede, Netherlands
Fax +81 (0) 3 5633 7101
Tel +31 (0) 318 549 300
Email: [email protected]
Fax +31 (0) 318 549 309
E-mail: [email protected]
2-4 Recommended Storage Practice
If intermediate or long term storage is required for equipment, as supplied
by Brooks Instrument, it is recommended that said equipment be stored in
accordance with the following:
a.
Within the original shipping container.
b.
Stored in a sheltered area, preferably a warm, dry heated warehouse.
c.
Ambient temperature 70°F (21.0°C) nominal 110°F maximum/45°F
minimum (43°C maximum/7.1°C minimum).
d.
Relative humidity 45% nominal 60% maximum/25% minimum.
Upon removal from storage, a visual inspection should be conducted to
verify the condition of equipment is "as received". If the equipment has
been in storage for an excess of two (2) years or in conditions in excess of
those recommended, all pressure boundary seals should be replaced and
the device subject to a hydrostatic/pneumatic pressure test to 150% of
rated pressure.
