Brooks EIB3018, Instruction Manual

Page: 31 / 60

31
Note: In an interconnected system, the Alarm may also be triggered to sound by another Alarm. In
this case, the Alarm will sound but will not flash its red LED alarm indicator. This means that while
the Alarm is sounding, it is not the unit actually sensing the alarm event. If you have a BAATLS or
BAALOC or EIB450 Remote Control installed, press the locate switch to leave just the Alarm that has
triggered the system sounding and identify the source and type of the alarm.
• When fire is detected, you should evacuate the residence, closing all doors and windows along
the way.
• If CO is detected, you should open all windows and doors (if safe to do so), and then evacuate.
Event type
every 5 sec
every 4 sec
x 4
every 4 sec
x 3
every 4 sec
x 2
FIRE
(EIB3028 only)
Note: The CO Alarm may sound if cigarette smoke is blown into it, or aerosols are released nearby
CO Gas Level
≥ 50ppm
Red LED
LED icon
Fire or CO
(EIB3028 only)
Alarm
Table B - Alarm indicators
CO Gas Level
≥ 100ppm
CO Gas Level
≥ 300ppm
Alarm triggered by
interconnected Alarm
Flashing
Flashing
within
60-90 mins
within
10-40 mins
within
3 mins
Flashing
Flashing
Event type
x 2 every
48 secs x 2 every
8 secs
x 4 every
8 secs
x 6 every
8 secs
x 8 every
8 secs
x 4 every
48 secs
x 6 every
48 secs
x 8 every
48 secs
FIRE
CO Gas Level
≥ 50ppm
Red LED
1
st
24h 1
st
24h > 24h on test button > 24h on test button
LED icon - Fire or CO (EIB3028 only)
Table C - Memory indicators
CO Gas Level
≥ 100ppm
CO Gas Level
≥
300ppm
Flashing
Flashing
Flashing
Flashing
= LED on solid
= LED flashing