Unpacking and Inspection
High Capacity Helium Compressor
High Capacity Helium Compressor Inspection
Manual
8040600
Brooks Automation
3-6
Revision A
High Capacity Helium Compressor Inspection
Inspect the High Capacity Helium Compressor for visible signs of damage as
indicated in the following paragraphs.
Compressor
Inspect the exterior of the High Capacity Helium Compressor for visible signs
of damage or evidence of an oil leak. Check the Helium Pressure Gauge for
proper helium pressure. Report any damage to the shipping company at once.
Helium Static Pressure Verification
Refer to Section 4, Operation, for more information on the static helium charge
pressure of the High Capacity Helium Compressor.
Shipping Carton Contents
The shipping carton should contain the following items:
•
High Capacity Helium Compressor
•
Installation, Operation, and Maintenance manual
Crush Hazard
Do not remove the leveling screws from the
compressor rack. The unit may become unsteady
and possibly crush objects beneath it.
Removing the Wheel Assemblies (Optional)
1. Using a 5/8 inch wrench, adjust the leveling screws to lift the High
Capacity Helium Compressor wheel assemblies off the floor as
shown in
.
2. Remove the four wheel assembly bolts, as shown in
, from
each wheel assembly. Remove the wheel assemblies from the side of
the High Capacity Helium Compressor rack.
