BRONKHORST EL-FLOW Select Series, Instruction Manual

Page: 53 / 53

Bronkhorst®
Instruction Manual EL-FLOW® Select 9.17.099J 53
Parameter index
Parameters
Parameters - Alarms
Alarm Delay Time 40
Alarm Info 40
Alarm Maximum Limit 40
Alarm Minimum Limit 40
Alarm Mode 39
Alarm New Setpoint 41
Alarm Setpoint Mode 40
Reset Alarm Enable 41
Parameters - Counter
Counter Limit 42
Counter Mode 41
Counter New Setpoint 42
Counter Setpoint Mode 42
Counter Unit 41
Counter Value 42
Reset Counter Enable 42
Parameters - Device identification
BHT Model Number 38
Customer Model 38
Device type 39
Firmware version 39
Identification number 39
Serial Number 38
User Tag 38
Parameters - Fluid set
Capacity 100% 45
Capacity Unit 45
Capacity Unit Type Pressure 45
Capacity Unit Type Temperature 45
Fluid Name 44
Fluid Set Index 44
Parameters - Fluid set (advanced)
Density 46
Fluid Temperature 46
Heat Capacity 46
Inlet Pressure 46
Outlet Pressure 46
Thermal Conductivity 46
Viscosity 46
Parameters - Master/Slave
Master Node 47
Slave Factor 47
Parameters - Measurement and control
Analog Input 38
Fmeasure 37
Fsetpoint 37
Measure 37
Pressure 37
Setpoint 37
Setpoint Slope 38
Temperature 37
Valve Output 38
Parameters - Network configuration
Fieldbus1 Address 43
Fieldbus1 Baud Rate 43
Fieldbus1 Parity 43
Fieldbus2 Address 44
Fieldbus2 Baud Rate 44
Fieldbus2 Parity 44
Parameters - Special
Control Mode 35
Init Reset 35
IO Status 36
Reset 35
Wink 35