background image

2

•  Do not plug in, operate, or store the unit in locations where flammable or combustible materials are 

used or kept.

•  Do not use industrial water, or gray water for the supply, as this may cause skin damage or disease.
•  Turn off the main water supply valve when cleaning.
•  For children and seniors who may have difficulties with adjusting temperatures or those with 

sensitive skin or impaired heat sensitivity, set the temperature of the wash spray and seat to “low” 
or “off” to prevent burning.

•  Close supervision is necessary when this product is used by children, seniors, or persons requiring 

general assistance.

•  Do not press the buttons using excessive force.
•  Do not stand on top of or place any heavy objects onto the seat cover.
•  Use this product for its intended use only, as described in this manual. Do not use any attachments 

that are not recommended by Brondell.

SAVE THESE INSTRUCTIONS

SAFETY INFORMATION 
(IMPORTANT SAFEGUARDS)

DANGER

Failure to observe the following warnings may result in electric shock, fire, 
personal injury, property damage or product damage.

•  Do not use the product in locations exposed to excessive moisture and do not splash water 

onto the product.

•  While cleaning the bathroom, pull the power plug out of the electrical outlet and exercise 

caution to ensure that water or cleaning supplies do not  splash onto the bidet. Failure to do so 
may result in electric shock or fire.

•  If foreign material enters the product, pull the power plug out of the electrical outlet, turn off 

the main water valve, and call the Brondell Service Center.

•  Do not disassemble, repair, or modify the product yourself.
•  Do not use the product while wet from bathing or showering.
•  Do not place or store the product where it can fall or be pulled into a tub or sink.
•  Do not place in or drop the product into water or any other liquid.
•  Do not reach for the product if it has fallen into water. Unplug the product immediately and call 

the Brondell Service Center.

•  Do not use the product if it is not working properly. Please unplug the product immediately, 

close the main water supply valve, and call the Brondell Service Center at

 888-542-3355

Failure to do so may result in electric shock, fire, or flooding.

WARNING

Failure to observe the following warnings may result in electric shock, fire, 
personal injury, property damage or product damage.

Summary of Contents for SWASH BL67





























Reviews: