brondell Halo PH10-B, Owner'S Manual

Page: 13 / 64

11
Always remove the protective plastic packaging from the filter before installing the filter.
1. Proper care and cleaning of the Halo is critical to performance. The following chart shows the
recommended cleaning intervals and method for each part of the unit.
* Filter life may vary according to usage and environment.
Replacement Filter Packs are available for purchase at brondell.com.
When it is time to change one or both of the filters, the Filter Change Indicator will activate, and
the name of the filter that needs replacing will illuminate. After replacing the filters by following
the steps on Page 12, please see Page 13 for instructions on how to reset the Filter Change
Indicator.
PART TIME METHOD
Filter Cabinet As needed
Wipe with damp cloth first.
If needed, follow with a mild,
non-abrasive cleaner.
Air Intake and Outlet Every two months
Clean with a soft brush or cloth.
Do not allow dust to fall
inside the Halo
Air Sensor Every two months See Page 14
Mesh Pre-Filter
Every two to
four weeks
Vacuum or rinse thoroughly in
warm water as needed.
Let dry before reinstalling.
Do not use heated and/or
compressed air to dry the
Mesh Pre-Filter
Carbon Filter One year* Replace*
True HEPA Filter One year* Replace*
CLEANING SCHEDULE
REPLACING THE FILTERS
MAINTENANCE