1300 276 642
www.bromic.com/refrigeration
9
5. OPERATION
Start-up
•
Connect the appliance to the mains power supply and check that the compressor,
electronic controller, lighting and all fans are functioning correctly.
•
The compressor and condenser fan should operate should operate 3 minutes after the unit
has been connected to the power supply.
•
The evaporator fan should operate after the unit has been plugged in.
•
The electronic controller will display the current cabinet temperature after the unit has
been connected to the power supply.
•
The LED indicates that refrigeration circuit is operating.
•
During the start-up delay (3 minutes), the LED is flashing
•
The LED indicates that the refrigeration circuit is defrosting
Setting the temperature
i.
Press the button for more than 2 seconds.
ii. The value of the set point will be displayed and the ‘°C’ or ‘°F’ LED starts blinking.
iii. Press or arrow key within 10 seconds to adjust the set point.
iv. Press the key again or wait 10 seconds.
