1300 276 642
www.bromic.com/refrigeration
10
6. PRODUCT LOADING AND STORAGE
Start-up
•
Clean the interior surface with a soft cloth and warm water before loading.
•
Ensure there is free circulation of air between the products.
•
Do not block the evaporator fan.
•
Do not overstock the refrigerator.
•
Keep refrigerator door openings to a minimum.
•
Some products are sensitive to ultraviolet (UV) light, please see storage guidelines from
the manufacturer before removing from packaging.
•
Maximum recommended shelf load is 20kg.
IMPORTANT
: Run the refrigerator for at least 2 hours before loading.
7. MAINTENANCE
Cleaning the Cabinet
•
Remove the products and transfer to a suitable location prior to cleaning the inside
of the cabinet.
•
Do not use any aggressive or abrasive cleaning agents.
•
Never use a water hose or a high-pressure jet to clean.
•
Do not use sharp or pointed objects for cleaning.
•
Clean the inside and outside of the appliance with a clean damp cloth or with a
neutral cleanser.
•
Dry all surfaces with a dry cloth.
WARNING
: Disconnect the appliance from the power supply before performing any
maintenance. Never unplug the appliance by pulling on the cord. Always grasp the
plug firmly and pull straight out of the outlet.
WARNING
: Exposure to significant water ingress will void warranty and cause
potential safety issues. If the unit should be exposed to water, please contact the
manufacturer immediately.
IMPORTANT: Warranty may be void if there is no evidence of preventative
maintenance is performed on the appliance.
WARNING
: WARNING: Do not store explosive substances such as aerosol cans with
a flammable propellant inside the appliance.
Condenser Coil
IMPORTANT:
The condenser coil must be cleaned with a vacuum or brush once a
month. The condenser coil must be cleaned regularly to maintain the performance
and minimise power consumption. A poorly maintained condenser coil can lead to
failure of the unit and higher cabinet temperatures.