background image

1300 276 642

www.bromic.com/refrigeration

4

Read all instructions before installing or using this appliance

Retain this manual for future reference

Use this appliance only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock or injury to persons.

Improper installation, adjustment or alteration and failure to follow the warnings and instructions in
this manual could result in severe personal injury, death or property damage

The manufacturer is not responsible for any damage that could happen from improper use. The
manufacturer emphasises that this appliance should be used in a responsible manner and that all
procedures, warnings, and safety instructions contained in this booklet be followed strictly.

Check the appliance for damage. Do not operate a damaged unit.

Check for damage to the appliance regularly. If damage to the appliance is suspected, discontinue
use immediately and contact the supplier or qualified person to repair.

This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible of their safety.

Keep packaging material out reach of children

Children should be carefully supervised to ensure that they do not play with the appliance

Do not attempt to alter the appliance in any manner.

Please pay attention to the maximum load limit when filling the shelves.

All work on electrical equipment must be carried out by a qualified and licenced technician only.

Do not perform maintenance until the appliance has been turned off and power disconnected.

Never detach any cover except where specifically instructed in this manual. Doing so might expose
live electrical parts.

Do not operate the appliance with panels, covers or guards removed.

Keep the air intake and outlets free of obstructions.

Do not use the appliance outdoors.

If the supply cord becomes damaged, it must be replaced by an authorised service agent or similarly
qualified person in order to avoid a hazard.

If the appliance has not been used, or will not be used for a long period of time, disconnect
power supply.

Ensure the appliance has adequate ventilation.

2. IMPORTANT NOTES AND WARNINGS

Summary of Contents for PP1700














Reviews: