EG300 Broilchef LP Gas Grill
Owner’s Manual
13
Step 16 (Heating plates, Cooking grates and warming
rack installation)
a) Put seven PCs heating plate (Z) on the plate
support upon tube burners.
b) Place three cooking grate (Y) upon the heating
plates.
c) Install warming rack (AA) by put the four legs on the
side walls of firebox.
Pre-installed bolt x 4
Step 17 (Grease pan and heat insulator
installation)
a) Loosen the pre-installed bolts on grease pan
(DD) and allow 1/4 bolt’s length to extend
from grease pan.
b) Align the holes on heat insulator (EE) with
the bolts extended from grease panel. Push
forward heat insulator until it locks into place
and tighten the bolts using screwdriver
provided.
c) Insert the grease pan assemble into the
guide underneath the firebox.
Step 18 (Basket, handle and
support assembly)
a) Align the holes on basket
support (T) with the holes on
basket handle (U).
b) Insert one bolt (ii), one spring
washer (kk) and one flat
washer (ll) into each
pre-drilled holes. Tighten
bolts using screwdriver
provided.
c) Place basket (S) on basket
support.
d) Hang the basket handle on
left side table
