EG300 Broilchef LP Gas Grill
Owner’s Manual
10
Step 7 (Door assembly)
a) Insert the bottom pin of door
(K) into the pre-drilled hole on
the cart bottom panel.
b) Push down the top pin on
door
and insert it into the
pre-drilled hole on the right
end of front beam (J).
c) Close the door.
Step 8 (Grease cup holder
assembly)
a) Align the holes on grease cup holder
(L) with the holes on the right side
panel (H).
b) Insert one bolt (ii) and one flat
washer (ll) into each pre-drilled
holes. Tighten bolts by hand.
c) Go back and tighten all bolts using
screwdriver provided.
d) Place grease cup (N) on grease cup
support.
Step 9 (Gas tanker holder assembly)
a) Align the holes on gas tank holder (M) with the
holes on the left side panel (G).
b) Insert one bolt (jj) and one flat washer (mm) into
each pre-drilled holes. Tighten bolts by hand.
c) Go back and tighten all bolts using screwdriver
provided.
