GSS2520JAN
Instruction Manual
Guide d’utilisation
7
Hardware Contents
Hardware listed above is not scaled to exact size.
(A screwdriver is required on assembly and is included for your convenience).
Assembly Instructions
Remove all contents from the carton packaging. Make
sure all parts are present before attempting assembly.
Once the grill is fully assembled, go back and check to
make certain all the bolts are secure. Tighten again using
the screwdriver provided if necessary.
Estimated Assembly Time: 45 minutes.
Part Description
Quantity
Picture
AA
M6 x 15 Bolt
32 PCS
BB
M4 x 10 Bolt
9 PCS
CC
M6 Flat Washer
24 PCS
DD
M6 Lock Washer
24 PCS
EE
M4 Flat Washer
6 PCS
FF
M4 Lock Washer
4 PCS
GG
M4 Nut
4 PCS
HH
Screwdriver 1
PC
Step 1 (Casters assembly)
a) Align the hole on one the two swivel casters (U) with the
holes on left bottom side of the cart base (A).
b)
Insert a M6 x 15 bolt (AA), one M6 lock washer (DD)
and one M6 flat washer (CC) into each pre-drilled hole
and tighten by hand.
c)
Repeat the procedure with the two rigid casters (V) and
the holes on right bottom side of the bottom panel
d)
Tighten two bolts using the screwdriver provided.
Note: Before beginning assembly, make certain the two
swivel casters are locked.
