manualshive.com logo in svg

Brodie BiRotor B061A, Installation & Operation Manual

Share
Download
Brodie BiRotor B061A Installation & Operation Manual Download Page 3

Page 3/37

IOM BiRotor 3” to 6” R03

1 Read Me First

Notice

Brodie International, a Brodie Meter Co., LLC Compa-
ny (“Brodie”) shall not be liable for technical or edito-
rial errors in this manual or omissions from this man-
ual. Brodie makes no warranties, express or implied, 
including the implied warranties of merchantability 
and fi tness for a particular purpose with respect to 
this manual and, in no event, shall Brodie be liable for 
any special or consequential damages including, but 
not limited to, loss of production, loss of profi ts, etc.

Product names used herein are for manufacturer or 
supplier identifi cation only and may be trademarks/
registered trademarks of these companies.

The contents of this publication are presented for in-
formational purposes only, and while every effort has 
been made to ensure their accuracy, they are not to 
be construed as warranties or guarantees, expressed 
or implied, regarding the products or services de-

scribed herein or their use or applicability. We reserve 
the right to modify or improve the designs or specifi -
cations of such products at any time.

Brodie does not assume responsibility for the selec-
tion, use or maintenance of any product. Responsibil-
ity for proper selection, use and maintenance of any 
Brodie product remains solely with the purchaser and 
end-user.

Brodie International
Statesboro, Georgia, USA

All rights reserved. No part of this work may be repro-
duced or copied in any form or by any means - graph-
ic, electronic or mechanical - without fi rst receiving 
the written permission of Brodie International., 
Statesboro, Georgia, USA.

Summary of Contents for BiRotor B061A






































Reviews:

No comments

Brands by name

Popular brands

Load more brands