18
Inspection
Safety measures as described in Inspection/Maintenance schedule must be observed when
inspecting or testing a chair. Only authorized caregivers or maintenance staff should attempt to
inspect or test a chair.
BRODA recommends regular visual inspection for overall signs of wear, damage, loose or
missing fittings, and other safety concerns. If a breakage, defect, or operational problem is
detected, the chair must be repaired inspected and tested for function before it is returned to
service.
BRODA recommends that the chair be inspected as often as each use if there is any reason to be
concerned about the possibility of increased wear or loose or missing fittings.
The visual inspection should be performed by the facility, or if in a private residence, by the
individual responsible for the chair.
5.2
Functional Testing
BRODA recommends that the Chair should be tested for operation of the chair’s functions
without a resident in the chair.
The testing may be as often as each use if there is any reason
to be concerned about the possibility of increased wear or damage to the chair’s components.
If the caregiver or maintenance department performing the functional testing believes that any
function is not operating correctly,
the chair should be taken out of service until a satisfactory
functional test can be completed.
The caregiver or maintenance department performing the testing should be aware that the
seat tilt and leg rest elevation operations will be more difficult without a resident in the
chair.
When performing repairs or maintenance, do not use lubricants that contain solvents. Solvents
will damage many of the moving components in the chair. If necessary, a white, food grade
grease (lubricant) may be used on the sliding components in the chair, do not use spray
lubricants on any part of the chair.
WARNING:
After any adjustments, repair or service, before use, make sure all attaching hardware is
tightened securely. Otherwise injury or damage may result.
CAUTION:
DO NOT over-tighten hardware as this could cause damage to the frame.
Note: Please include the model number and serial number of the chair whenever you are ordering
parts. These can be found on a sticker that is attached to the base on the bottom of the chair.
Note: Only a person with training on the BRODA Chair should attempt to do any repairs or
maintenance on the chair. Certain repairs may require a BRODA representative to personally
attend to the repair. If you are unsure as to what is required, call BRODA customer service at
1-800-668-0637.
