GREASE FILTER
METAL WIRES
FIG. 9
OPERATION
Controls
The
light switch
turns the lamps on and off.
The
blower switch
: makes it possible to select the motor operating
speed. Position 0: motor off.
The
pilot lamp
lights up whenever the blower is on.
MAINTENANCE
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE
CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.
Grease Filter
The
grease filter
should be cleaned frequently. Use a warm deter-
gent solution. Grease filter is dishwasher safe.
To remove the grease filter: remove the grid by moving the 2 slide
fasteners “A” (Fig. 2); remove the metal wires and then the grease
filter (Fig. 9).
Non-Ducted Recirculation Filter
The Non-Ducted Recirculation filter should be changed every 6
months.
To remove the Non-Ducted Recirculation filter:
1. Remove the grid by moving the 2 side fasteners “A” (Fig. 2).
2. Remove the metal wires (Fig. 6) and replace the Non-ducted recir-
culation Filter.
Cleaning
Occasional care will help preserve its fine appearance.
• Clean with warm water and mild detergent only.
• Follow all cleaning by rinsing with clear water.
• Wipe dry with clean, soft cloth.
Light bulbs
This range hood requires two 40-Watt light bulbs (not included).
To change bulbs:
1. Remove the grid by moving the 2 slide fasteners (A).
2. Replace with light bulbs of the same type (MAX 40W, 120V,
Candelabra Base Bulb). CAUTION: BULB MAY BE HOT!
LIGHT
SWITCH
PILOT LAMP
BLOWER
SWITCH
FIG. 8
WIRING BOX
FIG. 7
3. Make electrical connections. Connect white to white, black to black
and green to green.
4. Replace wiring box cover and screws. Make sure that wires are
not pinched between cover and box.
SERVICE PARTS
KEY NO.
PART NO.
DESCRIPTION
4
B03295083
Side Fastener (Model PM390WW)
4
B03295038
Side Fastener (Model PM390S)
5
B03118154
Grid (Model PM390WW)
5
B03127682
Grid (Model PM390S)
6
B02011013
Spring
9
B08087922
Grease Filter
14
B02300233
Condenser
27
B02011155
Metal Wires
28
B02300280
Lampholder
29
B03293051
Light Fitting
45
BW0000019
Blower
48
B02310203
Motor
49
B03295076
Blower Wheel
53
B03204177
Rubber Washer
86
B08088378
Damper
115
BE3334250
Wiring Box
116
BE3334252
Wiring Box Cover
134
B03295084
Grid Stop (Model PM390WW)
134
B03295039
Grid Stop (Model PM390S)
152
B03292200
Wire Clamp
165
B03294780
Controls Box
165
B03295008
Box Condenser
196
BE3348672
Reflector
222
B03295080
Control Box Cover (Model PM390WW)
222
B03295040
Control Box Cover (Model PM390S)
223
B03295082
Blower Switch (Model PM390WW)
223
B03295042
Blower Switch (Model PM390S)
228
B08086263
Controls Board
229
B03201014
Pilot Lamp
241
B03295081
Light Switch (Model PM390WW)
241
B03295041
Light Switch (Model PM390S)
472
BE3344843
Controls Bracket
998
B080810782
Hardware Package
CAS
B06002013
Blower Assembly (Included Key No. 45,
48, 49, 53)
AQI
B06108607
Switch box Assembly (Included Key No. 165,
228, 28, 222, 152, 241, 223, 229)
(Model PM390WW)
AQI
B06108760
Switch box Assembly (Included Key No. 165,
228, 28, 222, 152, 241, 223, 229)
(Model PM390S)
-
-
“40 Watt Max.Candelabra
Bulbs not included”
-
B08999040
Non-Ducted Filter Kit
(purchased separately)
