5
4. CHOOSE THE OPENING
F
OR
VERTICAL
DISCHARGE
OR
NON
-
DUCTED
INSTALLATION
:
From outside the unit, remove the knockout in order to clear vertical discharge opening
(see illustration beside).
HR0122
F
OR
HORIZONTAL
DISCHARGE
:
From outside the unit, remove the knockout from back of hood (see illustration beside).
HR0123
5. BLOWER REMOVAL (HORIZONTAL DISCHARGE ONLY)
The EW54 Series range hoods are factory shipped with the blower mounted for a vertical discharge configuration. For a horizontal discharge
configuration, disassemble the blower from the inner top of the hood (see procedure below). It will be assembled to the inner back of the hood
once the hood is mounted on the wall.
2) Using a 5/16” socket, or a Robertson or a Phillips no. 2 screwdriver, remove the 4 blower mounting
screws (2 on each side) from the inner top of the hood (see pictures below). Set the blower and screws
aside.
HD0386
R
IGHT
SIDE
MOUNTING
SCREW
LOCATIONS
HD0385
L
EFT
SIDE
MOUNTING
SCREW
LOCATIONS
1) Unplug the blower.
HD0817
