3
OPTIONAL WIRING CONVERSIONS
1. Conversion to half-wattage.
The heater will produce less heat and use less electricity if
converted to half-wattage.
Disconnect ONE of the black wires with an insulated terminal
from the motor.
2. 120 VAC to 240 VAC Conversion.
1) Disconnect ONE of the black wires with an insulated
terminal from the motor.
2) Disconnect the two (2) white wires with insulated
terminals from each other. Do not remove wire from
beneath plastic wire tie.
3) Connect black wire to white wire.
NOTE: When heater is converted from 120 VAC to 240 VAC,
half-wattage conversion is not possible
BLACK
WIRES
(connected
to motor)
BLACK WIRE
(from motor)
WHITE WIRES
