18
19
F5
Dynamic Brake function on or off
Dynamic Brake function on
or off
F6
Doppler
Start Up
F7
Brake Squeal/Flanges and Air Brakes
Brake Set - Long Air Let-off
F8
Audio Mute on or off
Audio Mute on or off
F9
Short Air Let-off
Shut Down
F10
Locomotive’s Verbal Speed Readout in
SMPH.
Locomotive’s Verbal Status
Readout
F11
Short Air Let-off (Number Boards)**
Blow Down (Number Boards)
F12
Short Air Let-off (Cab Lights)
Water Injector (Cab Lights)
* Quantum supports the new NMRA 0-12 function key standard; the old 0-8
standard is not supported.
** Features in parentheses indicate alternate assignments when available.
If you have a DCC command station that supports only the older 0 to 8
function key standard, you will have no way to initiate Shut Down in Neutral
with these pre-assigned feature to function key mappings. There is an
interim solution to this problem; by changing CV 41 from its default value of
32 to decimal 128, you can control Shut Down in Neutral from function F7
(instead of function F9) on your DCC command station. In Forward and
Reverse, F7 will still control the locomotive Air Brakes.
Directional Lighting Operation (F0 or FL or Headlight)
The FL (or F0, or Headlight) key toggles the Directional Headlight/Reverse
Light System
24
on or off.
The defaults for Headlight and Reverse Light are off. When the FL key is
pressed, you will hear the steam electric generator (dynamo) start up and
the front head light will gradually increase in brightness as the dynamo revs
up.
When toggled on, the Directional Lights
25
come on according to the table
below.
Summary of Contents for Steam Locomotive
Page 47: ...47 ...