19
ROLLING THUNDER
TM
If the engine does not transmit far
enough:
First, set CV213 to 128 in the locomotive,
which sets the transmitter strength to
maximum.
If that is not sufficient, change the
following CV’s in the receiver, using
the instructions on page 14.
Set CV141 to 40
Set CV136 to 50
Set CV135 to 60
These settings lower the signal strength
needed to lock onto a locomotive.
CV141 is the minimum signal strength
to lock onto. Default is 100, so 40 is
pretty low. Setting lower than 40 can
cause it to lock onto background
noise.
