14
WWW.BROADWAY-LIMITED.COM
using the BLI DCMaster or any NMRA
compliant Digital Command Control
(DCC) system. To set using a DC
Master or DCC, instead of plugging
the receiver into household power
use the supplied track power cable
and connect the receiver to your
track.
Using DCMaster, hold both the Aux
and Vol buttons down while turning
on track power all the way. Then use
the Bell and Horn buttons to display
the CV you want to change. Press
Vol to select. Then use Bell and Horn
to display the new value. Press Vol to
select.
For DCC, the receiver’s default
address is 1. You will need to use
Operations Mode programming. To
change CV’s, press the Program/
Reset button on the receiver for one
