Venus Series User Manual
17
2.3
Console Installation
Local Console (Stand Alone KVM Switch Only)
Connect the monitor to the HDDB-15 female port on the back of the KVM unit
labeled with the monitor symbol at the Local Console connector.
There may be USB local console or PS/2 local console. For USB local console,
connect the USB keyboard to either one of USB local port and USB mouse to
the other USB port. These USB ports are special designed for keyboard and
mouse, and can not work with USB hub or other USB devices. For PS/2 local
console, connect keyboard to purple PS/2 port and mouse to green PS/2 mouse
port. There is a Daisy chain port under VGA ports.
Figure 2-6. Console Installation
2.4
Optional Module Installation
IP Module
Please refer to “IP KVM Module User Manual” for details.
IP Remote Console
Installation
: Power off the KVM switch firstly. Remove the cover of the add-on
slot, slide in the IP Module and make sure the module is fully inserted into the
slot.
The IP Module redirects local keyboard, mouse and video data to a remote
administration console. It allows you to control one or many computers locally at
the server site or remotely via the Internet using a standard browser.
