Mercury Series User Manual
22
PC port without Password illustrated below
(Figure 20)
:
Figure 20. PC port without Password
At factory default, no password is set for PS/2 KVM Switch as illustrated above.
Selected PC port is powered on with
indication.
To setup password please open OSD, select SECURITY. Please refer to
(Figure 17)
and
(Figure 18)
.
PC port with password illustrated below (Figure 21):
Figure 21. PC port with Password
Password request OSD appears for Port-1 computer with powered on
status.
Enter password directly. Password allowable length at 1 to 8 characters only (8
characters max). Press ENTER after password input to commence operation for
this PC.
SUPERUSER PASSWORD illustrated below (Figure 22):
Figure 22. SUPERUSER PASSWORD
If SUPERUSER password is set, PS/2 KVM Switch will ask for password when
KVM is powered on or at RESET. Please enter password follow by ENTER key
to continue operation.
F3- SELECT SCAN PORT
Press F3 at OSD main menu to select Auto Scan active port. If a port is selected
for Auto Scan, a icon appears, press F3 again, the icon will
disappear.
Summary of Contents for Mercury 8 / 16
