Mercury Series User Manual
18
9.3 OSD Main Screen Headings
indicates the computer is powered on at selected port
indicates the computer attached at this port has password
protected. All ports at factory default do not have password
assigned, therefore no icon present
USER1~8 Port name of corresponding port number. USER 1~8 illustrated
as factory default setting.
indicates the PC port is set for Auto Scan Mode. At factory default
all PC port is active for Auto Scan.
S
Every time switching is made PS/2 KVM beeps for notification.
Please press Scroll Lock twice followed by “S” to turn beeper on
or off
_
to select 1~8 computer Ports (1~8 PC Port)
+
to select A~H computer port (9~16 PC Port)
R
to set factory default.
Password will not be erased after this operation
↑
Select computer at previous port
↓
Select computer at next port
PgUp
Select previous bank
PgDn
Select next bank
1 1
Left hand side ”1” indicates current active port, right hand side “1”
indicates current active bank.
F1
Edit computer name
F2 Password
setting
F3
Select scan port
F4
Auto scan mode
F5
Hot key setting
ESC Exit
OSD
SCAN
RATE
Scan rate
VERSION Firmware
version
Table 7. OSD Main Screen Headings
Summary of Contents for Mercury 8 / 16
