2.8
Insert the pH sensor into the process media.
Model SU800 SingleSense™ Single-Use pH Sensor
Figure 8. Lever arm inserted and secured
September 2021 | 19
OM-062103 R1
•
Push the lever arm forward until
the handle touches the silicone
tubing. The glass pH sensor will
insert into the process media.
•
An audible click may occur as the
lever arm is pushed forward.
Note:
Securing the lever arm in
forward position with a red safety zip
tie as shown is recommended to
prevent accidental retraction. Add a
lockout tag per your standard
operating procedures.
2.0 Startup, Calibration, and Operation
Operation Manual