Page
4
of
4
9.
Level and adjust the Grille Guard and
ti
ghten all hardware.
10.
Carefully place the pla
sti
c top radiator cover in posi
ti
on and mark the areas that will need to be cut from the
p
lastic
cover to clear the (2) Top Brackets. Once properly trimmed, reinstall the pl
astic
cover using the original
hardware.
11.
Do periodic inspec
ti
ons to the installa
ti
on to make sure that all hardware is secure and
ti
ght.
Driver S
Keystone Automo
ti
ve Opera
ti
ons Inc. (KAO) warrants this product to be free of defects in material and workmanship at the
time
of
purchase by the original retail consumer. KAO disclaims any other warran
tie
s, express or implied, including the warranty of
fi
tness
for a par
tic
ular purpose or an intended use. If the product is found to be defe
cti
ve, KAO may replace or repair the product a t our
op
ti
on, when the product is returned prepaid, with proof of purchase.
Altera
ti
on to, improper installa
tio
n, or misuse of this product
voids the warranty. KAO’s liability is limited to repair or replacement of products found to be defe
cti
ve, and speci
ficall
y excludes
liability for any incidental or consequen
ti
al loss or
damage.
(1) 10mm x 25mm Button
Head Allen Bolt
(2) 10mm x 20mm Flat
Washers
(1) 10mm Nylon Lock Nut
Fig 7
Front
Complete Installation
Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment
, wax this product a
ft
er installing. Regular waxing is recommended to add a
protec
tive
layer over the
fi
nish. Do not use any type of polish or wax that may contain abrasives that
could damage the
fi
nish.
For stainless steel
: Aluminum polish may be used to polish small scratches and scu
ff
s on the
fi
nish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes
: Mild soap may be used to clean the Sidebar.
