Page
1
of
4
G r ill G uar d
PARTS LIST:
Qty
Part Description
Qty
Part Description
1
Grille Guard
2
10-1.50mm x 40mm Hex Bolts
1
Passenger Side Mounting Bracket
2
10-1.50mm x 25mm Hex Bolts
1
Driver Side Mounting Bracket
4
10mm x 30mm OD x 2.5mm Large Flat Washers
1
Passenger Side Top Bracket
8
10mm x 20mm OD x 2mm Flat Washers
1
Driver Side Top Bracket
2
10mm Lock Washers
4
12-1.75mm x 30mm Hex Bolts
4
10mm Nylon Lock Nuts
8
12mm x 32mm OD x 3mm Flat Washers
2
8-1.25mm x 25mm Hex Bolts
4
12mm Nylon Lock Nuts
4
8mm ID x 24mm OD x 2mm Flat Washers
2
10-1.5mm x 20mm x 70mm x 6mm Nut Plates
2
8mm Nylon Lock Nuts
2
10-1.50mm x 25mm Button Head Allen Bolts
REMOVE CONTENTS FROM BO X. VERIFY ALL PARTS ARE PRESENT
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION
INSTALLATION PROCEDURE:
1.
Use a flat blade screwdriver to carefully remove all fasteners from the plastic cover on the top or the radiator,
between the radiator and the grille. Also remove the lower splash guard under the vehicle.
NOTE
: Pay close
attention to the type and location of all factory fasteners to make reinstallation easier. Move the (2) plastic
covers to clean, stable work area.
2.
Select the driver side Frame Mounting Bracket and insert it into position above the crossmember. Line up the
rear mounting hole with the factory hole in the frame and temporarily bolt the Bracket into position with the
included (1) 10mm x 25mm Hex Bolt, (2) 10mm x 20mm Flat Washers and (1) 10mm Nylon Lock Nut,
(Figure 1)
.
Passenger Side Frame
Mounting Bracket
Driver Side Frame
Mounting Bracket
Passenger Side Top
Mounting Bracket
Driver Side Top
Mounting Bracket
Install Time
: 120 - 240 Minutes
(Professional Installation)
Install Note
: Cutting request
TOLL FREE SUPPORT: 866 638 4870
Fits
:
Grille Guard for Honda CRV 2010-2011
PART NUMBER: WCHO-281-21-10B
