Windows Driver Advanced Properties and Event Log Messages
NetXtreme-E User’s Manual
February 26, 2018 • NetXtreme-E-UG100
Page 36
0x001A
Incompatible speed selection between Port 1 and Port
2. Reported link speeds are correct and might not
match Speed and Duplex setting.
0x001B
Incompatible speed selection between Port 1 and Port
2. Link configuration became illegal.
0x001C
Network controller configured for 25Gb full-duplex link.
0x0020
RDMA support initialization failed.
0x0021
Device's RDMA firmware is incompatible with this
driver.
0x0022
Doorbell BAR size is too small for RDMA.
0x0023
RDMA restart upon device reset failed.
0x0024
RDMA restart upon system power up failed
0x0025
RDMA startup failed. Not enough resources.
0x0026
RDMA not enabled in firmware.
0x0027
Start failed, a MAC address is not set.
0x0028
Transmit stall detected. TX flow control will be disabled
from now on.
Table 23: Event Log Messages (Cont.)
