Broadcom Emulex LPe31000, Quick Installation Manual

Page: 17 / 26

Broadcom LPe3X00X-IG114-101
17
Emulex LPe31000-Series and LPe32000-Series Adapters Quick Installation
Guide
Chapter 3: References
3.1 LPe31000-Series and LPe32000-Series Adapter Specifications
The specifications of the LPe31000-series and LPe32000-series adapters are listed in Table 7 .
Table 7: LPe31000-Series and LPe32000-Series Adapter Specifications
Parameter Range
Physical dimensions LPe31000-series and LPe32000-series adapters: Low-profile form factor, 6.600 inches by
2.713 inches.
Power requirements Single-channel LPe31000 adapter: 8.6W (typical), 9.6W (maximum)
Single-channel LPe32000 adapter: 8.8W (typical), 9.8W (maximum)
Dual-channel LPe31002 adapter: 9.3W (typical), 10.3W (maximum)
Dual-channel LPe32002 adapter: 9.6W (typical), 10.6W (maximum)
Quad-channel LPe31004 adapter: 11.1W (typical), 11.9W (maximum)
Power susceptibility The LPe31000-series, and LPe32000-series adapters can operate within the following
voltage ranges:
PCIe 12V: 12V±8%, 3.3V±9%
Power supply noise susceptibility: 100
mV p-p at frequencies 100 kHz or less
Airflow 200 linear feet per minute (minimum, LPe31000-series and LPe32000-series adapters)
Temperature 0°C to 55°C (operating)
–20°C to 85°C (storage)
NOTE: Operating adapters in higher temperature conditions may result in early failure.
Humidity 5% to 95% (noncondensing, 22°C wet bulb) for storage
10% to 90% (noncondensing, 22°C wet bulb) for operation
Agency approvals for
LPe31000-series and
LPe32000-series
adapters

Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1 when equipped with
approved optical devices

UL recognized to UL60950-1 2nd Edition

cUR recognized to CSA 22.2, No. 60950-1-07

TUV certified to EN60950-1+A11+A1+A12+A2

FCC Rules, Part 15, Class A

Industry Canada, ICES-003, Class A

EU (CE Mark)

EN55024:2010

EN55032:2012, Class A

Australian EMC Framework (RCM)

AS/NZSCISPR32:2015, Class A

Japan VCCI, Class A

Taiwan BSMI (CNS 13438), RoHS (CNS 15663), Class A

Korea KCC, Class A

RoHS compliant (Directive 2011/65/EU)

China RoHS compliant
Vibration, peak
acceleration 0.25g (5 Hz to 500 Hz)
(Sweep rate = 1 octave/minute)