Broadcom
LPe3X00X-IG114-101
12
Emulex LPe31000-Series and LPe32000-Series Adapters
Quick Installation
Guide
Figure 6: Connecting a Fiber-Optic Cable
2. After the appropriate cable is connected to the adapter, connect the other end to the FC device.
When the cable is connected to the adapter, you are ready to apply power to the system.
2.4 Broadcom LightPulse
®
Accessories
The following table provides a list of approved (locked) optics for the LPe31000-series and LPe32000-series adapters:
NOTE:
Only Broadcom accessories are warranted and fully supported by Broadcom Technical Support.
2.5 Applying Power
To apply power:
1. Verify that the adapter is securely installed in the system.
2. Verify that the correct media is attached.
3. Plug in and turn on the system.
4. Watch the LEDs for
POST
results.
Table 5: Approved Optics for LPe31000-Series and LPe32000-Series Adapters
Model Number
Model Name
Quantity
Interface
LPe16100-OPT
16GFC spare optic (short wave laser with LC connector
SFP+
optic) – 1 pack
1
SFP+
LPe16100-OPTx2 16GFC optics kit (short wave laser with LC connector SFP+ optic) – 2 packs
2
SFP+
LP32-SW-OPT-1
LP, 32GFC, SW, SFP+, OptTcvr, 1 piece
1
SFP+
LP32-SW-OPT-2
LP, 32GFC, SW, SFP+, OptTcvr, 2 pieces
2
SFP+
Summary of Contents for Emulex LPe31000
Page 26: ......
