53-1005235-09 Installation Guide
Brocade
®
G630 Switch Hardware Installation Guide
12. FC Port 119 (QSFP 5) Status LED
13. FC Port 118 (QSFP 5) Status LED
14. FC Port 117 (QSFP 5) Status LED
15. FC Port 116 (QSFP 5) Status LED
16. QSFP Port 5
17. SFP+ (Upper) Port 58
18. SFP+ (Upper) Port 58 Status LED
19. SFP+ (Lower) Port 60 status LED
20. SFP+ (Lower) Port 60
System Power LED
Use the following table to interpret the system power LED.
Table 13: System Power LED Patterns during Normal Operation
LED Color
Status of Hardware
Recommended Action
No light
The system is off, or there is an internal
power supply failure.
Verify that the system is powered on, that
the power cables are attached, and that
your power source is live.
If the system power LED is not green, the
unit may be faulty.
Contact your solution provider.
Steady green
The system is on, and power supplies are
functioning properly.
No action is required.
System Status LED
Use the following table to interpret the system status LED.
Table 14: System Status LED Patterns during Normal Operation
LED Color
Status of Hardware
Recommended Action
No light
The system is off or there is no power.
Verify that the system is on and has
completed booting.
Steady green
The POST and initialization have
completed. The system is on and
functioning properly.
No action is required.
Steady amber (for more than 5 seconds
—can take over a minute to complete the
POST)
The system is going through the power-up
process.
No action is required.
Steady amber (for more than a few
minutes)
Unknown state, boot failed, or faulty
system.
When the POST completes and the switch
has failed, a steady amber color may result.
Perform the following steps:
1. Connect a serial cable to the system.
2. Reboot the system.
3. Check the failure indicated on the
system console.
4. Contact your solution provider.
53-1005235-09
64
Summary of Contents for Brocade G630-1
Page 99: ......
