19
TBC Configuration
The TBC card can be configured with a number of setup modes. In order to change a setup mode, you must
perform the following steps:
1.
Choose the ES-2200 channel containing the TBC card using the UNIT 1/ UNIT 2 SELECT button.
2.
Place the TBC card into CONFIGURATION SELECT mode by pressing the NTSC/S-VHS INPUT button so that
the NTSC and S-VID LEDs are flashing
3.
In CONFIGURATION mode, each button takes on a new function. Select the desired CONFIGURATION
function by pressing the appropriate button. CONFIGURATION functions are located below the buttons and are
labeled in blue.
4.
Choose a mode for the selected CONFIGURATION function by turning the rotary shaft encoder knob. Modes are
indicated by the number (1 to 5) legends located to the left of the LED level display. The default value for each
setup mode is 1. The following table details the various CONFIGURATION function choices.
Remember, after changing one or more of these TBC configure modes, the unit will remain in CONFIGURATION
mode until you press the CONFIGURE button to return the TBC to normal operation. Once the CONFIGURE LEDs
are extinguished, the buttons return to their primary functions which are denoted by the black legends located above
each button.
