e-mail:
voice:
360.854.9559
fax:
866.783.1742
16
Universal 4.1 MLR»Web Installation and Operation Manual
WEB SETUP
“I/O” Setup Page
When Booting Switch To:
Sets the power up input channel either 1,2,3,4,
Mute, or Last Source Selected.
Channels dropdown:
Select the input channel to be configured.
Label:
Each input can be given a custom label for easy
identification.
Email Addresses:
Email messages can be sent when an input source
becomes active as a result of auto mode or manual
control. Each input can have up to eight email address
assigned to using the checkboxes labeled 1-8.
User Defined Action Sequences: The behavior of the Universal 4.1 when in Auto
mode (as indicated/controlled on the Monitor/
Control page) is defined by the conditional state-
ment: If (Input) is active and is less than (audio
threshold in dB), wait (time in seconds) then
(action.) By default the Universal 4.1 is config-
ured to wait for 5 seconds after on the selected
input and then switch to next input in ascending
order.
NOTE:
After any item has been
changed, you MUST
press the “Save
Settings” button for
your changes to be
saved.
WEBSITE:
Visit our web site for
product updates and
additional information.
