e-mail:
voice:
360.854.9559
fax:
866.783.1742
17
Switcher Sentinel
®
3 »Web Installation and Operation Manual
SETUP
“Email/Network Setup” Web Page cont
Restoring Network Factory Defaults
The Switcher Sentinel® 3 factory defaults may be restored by depressing the recessed
front panel “default” push button for five seconds while powering up the unit.
“Email/Network Setup” Web Page – Device Network Settings
Device Address:
Enter a static IP address here.
Default: 192.168.1.55
Device Netmask:
Enter the Netmask here:
Default: 255.255.255.0
Gateway Address:
Enter the Gateway IP here:
Default: 192.168.1.1
DNS Server IP Address: Enter your DNS address here.
Default: 192.168.1.1
HTTP Port:
Normally Port 80
Default: 80
“Email/Network Setup” Web Page – SMTP Settings
SMTP Server Address:
The user can enter either an IP address in the
xxx.xxx.xxx.xxx format or a URI in the form:
smtp.comcast.net. In order to resolve the URI, a work-
ing DNS server must be present or its IP address
entered into the system.
SMTP Port:
Normally Port 25
Default: 25
SMTP Return Address:
Enter your return email address here. If an email can-
not be delivered, a message stating why will be sent to
this address.
NOTE: The user must enter the following items before an email can be successful-
ly sent: SMTP Server Address, SMTP Port, SMTP Return Address, SMTP Host ID,
SMTP username and SMTP password must be supplied if authentication is turned
on and the Recipient Address 1. The test email is sent to email recipient address 1.
The user should press the “Save Settings” button after entering the SMTP informa-
tion before attempting an email test. If authentication fails, the email is not sent,
please ensure that the username and password is correct.
SMTP Host ID:
Enter something here to identify the device.
SMTP Authentication:
When checked, Base64 SMTP authentication is used.
SSL/TLS is not supported.
SMTP Username:
Enter user name here.
SMTP Password:
Enter password here.
WEBSITE:
Visit our web site for
product updates and
additional information.
