e-mail:
voice:
360.854.9559
fax:
866.783.1742
15
Switcher Sentinel
®
3 »Web Installation and Operation Manual
SETUP
“I/O Setup” Web Page
Name:
Each input can be given a custom label for easy identification.
Email Addresses: Email messages can be sent when an input source becomes
active as a result of auto mode or manual control. Each input
can have up to eight email address assigned to using the check-
boxes labeled 1-8.
User Defined Action Sequences: The behavior of the Switcher Sentinel® 3 when in
Auto mode (as indicated/controlled on the Monitor/Control page)
is defined by the conditional statement: If (Input) is selected and
is less than (audio threshold in dB), wait (time in seconds) then
(action.) By default the Switcher Sentinel® 3 is configured to
wait for 5 seconds after on the selected input and then switch to
next input in ascending order.
Log Device:
This enables the email logging of switch status. See the
“Email/Network setup” page for email and logging settings.
Enable Alarms:
When enabled the device will record all switch position changes
in the event log.
When booting switch to: When the device powers up it can be set to switch to any
of the inputs, or to the “last input selected.”
NOTE: After any item has been changed, you MUST press the “Save Settings”
button for your changes to be saved.
WEBSITE:
Visit our web site for
product updates and
additional information.
