e-mail:
voice:
360.854.9559
fax:
866.783.1742
7
Mixer Buddy Installation and Operation Manual
SPECIFICATIONS
Specifications
Microphone On/Off control:
Line level, unbalanced, ¼” TRS jacks
Monitor I/O line level:
Unbalanced, RCA jacks
Monitor mute programming:
Dip switch, user selectable for each microphone channel.
On-Air light relay:
SPDT 30vdc @ 900 ma.
Power Requirement:
7.5 to 12.0 VDC only @ up to 1 amp, center positive.
2.1mm ID x 5.5mm OD coaxial connector. Surge protected.
Domestic power supply supplied.
Approvals:
Power supply, UL, CE Optional.
_________________________________________________________________________
NOTE: A template for counter-top and/or turret mounting is provided in the
appendix. If mounting of the Mixer Buddy external to the plastic case is required,
follow the steps below:
CAUTION!
Be aware that ample clearance is required for the rear panel
connectors.
1. Remove all connections from the Mixer Buddy.
2. Remove the four Allen-head screws from the top.
3. Carefully remove the Mixer Buddy from the plastic case
4. Utilizing the supplied template, cut a hole in the counter-top and/or turret.
5. Install the Mixer Buddy into the hole.
6. Purchase appropriate screws to secure the Mixer Buddy in the new location.
7. Re-connect all cables and check operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
