background image

e-mail: 

[email protected]   

voice: 

360.854.9559   

fax: 

866.783.1742

3

Mixer Buddy Installation and Operation Manual

INTRODUCTION

INTRODUCTION

Thank you for your purchase of a Broadcast Tools® 

Mixer Buddy 

is a four channel

microphone and monitor controller (referred to as the Mixer Buddy throughout this
manual).  We’re confident that this product will give you many years of dependable
service. This manual is intended to give you all the information needed to install and
operate the Mixer Buddy.

SAFETY INFORMATION

Only qualified technical personnel should install the Mixer Buddy.  Any attempt to
install this device by a person who is not technically qualified could result in a haz-
ardous condition to the installer or other personnel or damage to the Mixer Buddy
or other equipment.  Please ensure that proper safety precautions have been taken
before installing this device.  If you are unfamiliar with this type of equipment,
please contact a properly qualified engineer to handle the installation and setup of
the Mixer Buddy.

Broadcast Tools, Inc., is unable to support NON-Broadcast Tools software, hardware or
NON-Broadcast Tools computer/hardware/software problems.  If you experience these
problems, please research your hardware/software instruction manuals or contact the man-
ufacturers technical support department.

WHO TO CONTACT FOR HELP

If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.

If you would like more information about Broadcast Tools® products, you may
reach us at:

Broadcast Tools,  Inc.

131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:

866.783.1742

Internet Home Page: www.broadcasttools.com
E-mail:

[email protected]

THANK YOU FOR CHOOSING 

BROADCAST TOOLS® BRAND PRODUCTS!

CAUTION!

Broadcast Tools®

Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.

NOTE:

This manual should be
read thoroughly before
installation and operation.

WEBSITE:

Visit our web site for
product updates and
additional information.

Broadcast Tools is a Veteran Owned Business

Designed, Assembled and Supported in WA State, USA

Summary of Contents for Mixer Buddy













Reviews: