ee--m
maaiill::
vvooiiccee::
360.854.9559
ffaaxx::
360.854.9479
9
ICM-16/MHI Installation and Operation Manual
INSTALLATION
INTERFACING TO THE STUDIOS
Most likely you have different consoles, headphone amps, and other associated
equipment in each of your studios. By preparing a setup form, you can help prepare
yourself for the installation.
Using Electronically Balanced Inputs and Outputs
• Electronically balanced inputs and outputs must sometimes be treated different-
ly from transformer coupled inputs and outputs.
• With balanced equipment:
• When the MHI is used with equipment with balanced inputs and outputs of any
type:
• Be sure polarities are matched (if desired), then connect:
• (+) to hi (+)
• (-) to low (-) ground
•With unbalanced equipment:
• When the MHI is used with equipment having unbalanced inputs
and/or outputs:
• To use the MHI inputs with unbalanced outputs, connect:
• to hi (+)
• ground (-) input
• ground
• The polarity may be changed by reversing the (+) and (-) connections.
• To use the MHI output with unbalanced inputs, connect:
• (+) to (+) ground
CAUTION!
DO NOT CONNECT
THE LOW (-)
OUTPUT TO
GROUND!
NOTE:
The polarity may be
changed by reversing
the (+) and (-) connec-
tions. Tie the shield at
one end only. Never tie
each end of the cable
(there are always
exceptions).
WEBSITE:
Visit our web site for
product updates and
additional information
