e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
DTD-16 + G2 Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of the DTD-16 + G2 DTMF Tone Decoder, which we will
refer to throughout the manual as the DTD-16 + G2. We are confident this product will
give you many years of dependable service. This manual is intended to give you all the
information needed to install and operate the Broadcast Tools® DTD-16 + G2.
SAFETY INFORMATION
Only qualified technical personnel should install the DTD-16 + G2. Any attempt to
install this device by a person who is not technically qualified could result in a haz-
ardous condition to the installer or other personnel or damage to the DTD-16 + G2
or other equipment. Please ensure that proper safety precautions have been taken
before installing this device. If you are unfamiliar with this type of equipment,
please contact a properly qualified engineer to handle the installation and setup of
the DTD-16 + G2. Broadcast Tools, Inc., is unable to support NON-Broadcast Tools
software, hardware or NON-Broadcast Tools computer/hardware/software prob-
lems. If you experience these problems, please research your hardware/software
instruction manuals or contact the manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment. If you would like
more information about BROADCAST TOOLS® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:[email protected]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
Broadcast Tools is a Veteran Owned Business
Designed, Assembled and Supported in WA State, USA
