ee--m
maaiill::
vvooiiccee::
360.854.9559
ffaaxx::
360.854.9479
16
Broadcast Tools
®
ACS 8.2 Eight Input, Dual Output StereoMatrix Audio Controll Switcher
INSTALLATION
INSTALLATION GUIDELINES
Set-up Commands:
*uMM
- Open up Menu
*uC4x
- Set RS-232 mode timings: x = 1, Turn ON RS-232 mode
NO delays on sending data. x = 0, Turn OFF RS-232 mode
(delay for RS-232 charge pump startup before sending
response, unless ID = 0).
*uCCx
- Set Serial Speed. See dipswitch SW17-3 & 4.
*uCEx
- Enable Error and Good Responses - Where x = Y to enable
and N = disable. In this mode, when a command is sent that
is in error, the unit will reply (possibly before receiving the
entire command) with “EEE.” If the command is sent
correctly, the unit will reply with “RRR.”
*uCDEF
- Set factory defaults.
*uCIIttt
- Set “PIP” Programmable Pulse Stretcher Input Duration =
ttt: 000 –> 255 hundredths of seconds (255 = 2.55 Seconds)
*uCIOiittt
- Ignore, send OK
*uCLx
- Lock Front Panel if x is “L”. Unlock Front Panel if x is “U”
*uCPR
- Power up audio state: Restore audio from power up state
*uCPS
- Power up audio state: Save power up state
*uCRtt
- Set Relay Momentary Pulse Length – tt: 00-99 for 00 –> 9.9
Seconds
*uCSAtttt
- Set silence sensor time delay to tttt seconds (0002 – 9999),
0000 = OFF
*uCSBtttt
- Set silence sensor restore delay to tttt seconds (0002 –
9999), 0000 = OFF
*uCSDttt
- Ignore, send OK
*uCST
- Ignore, send OK
*uCSVttt
- Ignore, send OK
Glossary Of Command Notation:
Character String
Meaning
Allowable
Values
u
Unit ID
0-3
ii
Input Number
01-08
o
Output Number
1-2
r
Output Relay
1-8
r
Open Collector
1-8
