Broadcast Tools ACS 8.2, Installation And Operation Manual

Page: 18 / 22

ee--m maaiill::
support@broadcasttools.com
vvooiiccee::
360.854.9559
ffaaxx::
360.854.9479
18
Broadcast Tools ® ACS 8.2 Eight Input, Dual Output StereoMatrix Audio Controll Switcher
INSTALLATION
INSTALLATION GUIDELINES
*uiiMA - Mute input “ii” for all outputs
*uiiMo - Mute input “ii” for output “o”
*uMo - Mute output “o”
*uMA - Mute all outputs
Information Retrieval Commands:
*POLL - Respond with unit (ID) address in appropriate time slot. If
there are multiple units on the line, each will respond with a
different delay after receipt of this command.
*uSA - Ignore, Send OK
*uSL - Send Audio Status: SuLo,x,x,x,x,x,x,x,x<CR><LF>. “u” is
unit ID, “o” is output, and “x” is “1”for connected; “0” for
not connected for each respective input. Example:
“S1L2,1,0,1,0,0,0,0,0<CR><LF> says that unit 1, output 2 is
connected to inputs 1 and 3.
*uSPii - Send single input (GPI) PIP status. Response is “SuP,ii,x”
where “x” is 1 if the corresponding input is high, 0 otherwise.
*uSPA - Send ALL input (GPI) PIP status. Response is:
“SuP,A,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x<CR><LF > where
input 0 is first and input 15 is last. “x” is 1 if the correspon-
ding input is high, 0 otherwise.
*uSO - Send status of all Open Collectors. Response is:
SuO,x,x,x,x,x,x,x,x<CR><LF>
*uSR - Send status of all relays. Response is:
SuR,x,x,x,x,x,x,x,x<CR><LF>
*uSS - Send status of silence sensors. Response is “SuS,a,b <CR><LF>
a = Output 1 / b is Output 2. 1 = Not silent, 0 = Silent.
*uU - Send Unit Information:<name(ACS 8.2)><version><cr><lf
*uY - Display configuration
Real Time Control Commands:
*uDxx - Delay xx seconds before processing next command.
*uDLxxx - Delay xxx seconds before processing next command.
*uZx - Echo character “x” to serial control port. This is useful in
debugging command strings.
WEBSITE:
Visit our web site for
product updates and
additional information.