1. HDMI IN 1~4: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI source equipment may be
connected by using an HDMI to DVI adapter.
2. HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output. DVI display equipment may be connected
by using an HDMI to DVI adapter.
3. SERVICE: This slot (USB 2.0) is reserved for firmware update use
only.
4. CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
5 RS-232: Connect directly to your PC/laptop to send RS-232
commands to control the unit.
6. IR IN: Connect to the provided IR Extender to extend the IR control
range of the unit. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
7. DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2.2 Rear Panel
1
2
3
4
HDMI IN
HDMI OUT
SER VICE
CONTROL
RS-232
IR IN
DC 5V
2
1
3
4
5
6
7
Broadata Technical Support, [email protected]
7
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
Summary of Contents for Link Bridge LBS-41H2
Page 2: ......
