Before attempting to use Telnet control, please ensure that both the
unit and the PC/Laptop are connected to the same active networks. To
access Telnet in Windows 7, click on the “Start” menu and type “cmd”
in the search field, then press “Enter”. Under Windows XP go to the
“Start” menu, click on “Run”, type “cmd” then press “Enter”. Under
Mac OS X, go to “Go-Applications-Utilities-Terminal”. See below for
reference.
Once in the CLI (Command Line Interface) type “Telnet” followed by
the IP address of the unit and “23”, then hit “Enter”.
This will connect us to the unit we wish to control. Type “help” to
list the
available commands.
Notes:
• Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
• If the IP address is changed then the IP address required for Telnet
access will also change accordingly.
4.2 TELNET CONTROL
Broadata Technical Support, [email protected]
12
LBS-41H2
Link Bridge 4x1 HDMI 2.0 Switcher
TM
Summary of Contents for Link Bridge LBS-41H2
Page 2: ......
