LBC-HDMI-T/R-WP User’s Manual
Link Bridge
TM
HDMI Wall Plate HDBaseT Transmission System
Broadata Technical Support, [email protected]
11
3.0 DC POWER CONNECTION
Congratulations! You are now ready to power up the LBC-HDMI-T/R-WP
and set up your network connection. In order to make sure that you
have a proper installation, please observe the following:
1.
Your AC jack has power.
2.
The 24VDC power supply is working.
3.
Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
4.
Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
LBH-HDMI-T/R-WP from sensitive voltage conditions.
The LBC-HDMI-T/R-WP derives power from an external 24VDC power
supply or via PoH (Power over HDBaseT). This power supply is a wall
mounted AC/DC adapter, 100-240 VAC, 50-60 Hz, at 1.0A. This power
supply comes standard for the LBC-HDMI-T/R-WP unless otherwise
specified. To provide power to the LBC-H/V-T-WP, simply connect the
power cord, already provided with the units, and connect it to the wall
jack. (You will find one power cord per unit). Once the power cord has
been connected to the wall jack, connect 24VDC to the unit and the unit
should power up immediately. If you have any problems or concerns,
regarding the installation, make sure that you have taken the proper
steps to ensure a proper power connection. Otherwise, feel free to
contact us for any questions you may have.
